TOWER THX

MONITOR THX

CENTER THX

SURROUND THX

The 1723 Tower features a completely custom built 2.5 way lineup of bass drivers, mid bass drivers and waveguide tweeter you cannot find anywhere else. Our HDF cabinets, thick crossover PCBs and ancillary parts, feature engineering detail you will not find at anything like the price. You will find no plastic parts, even if we could have used them to keep costs down without affecting sound quality.

BLACK GLOSS

WHITE GLOSS

BLACK SATIN

WHITE SATIN

Design
2.5-way

Tweeter
28mm

Woofer
4 x 8″

Enclosure
Sealed / vented

Enclosure material
High Density Fiberboard (HDF)

Xover freq.
120Hz / 1500Hz

Sensitivity
92dB/2.83v/1m

Freq. response

Sealed 55-20kHz (+/-3dB)
3 vents 38-20kHz (+/-3dB)
2 vents 34-20KHz (+/-3dB)

Ports
3 x 2.6″

Impedance
4-ohm nominal

Included
Manual. Spikes Kit. Port plugs.

Dimensions without feet
115H x 27.5W x 40D cm

Dimensions with rubber feet
116.2H x 27.5W x 40D cm

Dimensions with spikes kit
119.1H x 37W x 40D cm

Weight
50.6 kg (including spikes kit)

Break-in for optimal performance
50 hours

Recommended amplifier
Up to 500W RMS @ 4ohm

FREQUENCY RESPONSE

Frequency response does not reflect maximum output but shows its true response in a anechoic chamber. Typically you will see an elevated response in the bass response below 40Hz in room due to room gain, which can add around 6dB pr. octave under 40Hz depending on the size of your room.

POLAR RESPONSE

The charts display frequency response measured at different angles, the sum of which is referred to as power response. Much scientific research has been undertaken on this subject and a linear power response has proven a substantial impact on the overall sound, because the frequency response is more even in all directions. This means an Arendal Sound speaker will be more tolerant of differences in room shape, size, construction and materials.

IMPEDANCE RESPONSE

The impedance charts are electrical measurements of the loudspeaker's resistance vs frequency.

Featuring the same uncompromising approach we used to create the 1723 Tower, the 1723 Monitor was developed for smaller spaces and provide the perfect sonic partner to the matching 1723 Center. The 1723 Monitor features a completely custom built 2-way lineup of mid-bass drivers and a waveguide tweeter you cannot find anywhere else.

BLACK GLOSS

WHITE GLOSS

BLACK SATIN

WHITE SATIN

Design
2-way

Tweeter
28mm

Woofer
2 x 8″

Enclosure
Sealed / vented

Enclosure material
High Density Fiberboard (HDF)

Xover freq.
1500Hz

Sensitivity
89dB/2.83v/1m

Freq. response

Sealed 58-20kHz (+/-3dB)
2 vents 34-20kHz (+/-3dB)

Ports
2 x 2″

Impedance
4-ohm nominal

Included
Manual. Rubber pads. Port plugs.

Dimensions
63.5H x 27.5W x 40D cm

Weight
26.7 kg

Break-in for optimal performance
50 hours

Recommended amplifier
Up to 400W RMS @ 4ohm

FREQUENCY RESPONSE

Frequency response does not reflect maximum output but shows its true response in a anechoic chamber. Typically you will see an elevated response in the bass response below 40Hz in room due to room gain, which can add around 6dB pr. octave under 40Hz depending on the size of your room.

POLAR RESPONSE

The charts display frequency response measured at different angles, the sum of which is referred to as power response. Much scientific research has been undertaken on this subject and a linear power response has proven a substantial impact on the overall sound, because the frequency response is more even in all directions. This means an Arendal Sound speaker will be more tolerant of differences in room shape, size, construction and materials.

IMPEDANCE RESPONSE

The impedance charts are electrical measurements of the loudspeaker's resistance vs frequency.

In developing the 1723 Series, part of the reason for using a waveguided tweeter was that it offered controlled dispersion, plus a lower crossover point than a traditional tweeter flat mounted on a baffle. Lowering the crossover point, removed concerns about turning the 1723 Monitor on it’s side for use in the horizontal format under a screen. As such, the 1723 Center is the same speaker as the 1723 Monitor but sold separately and with the grill badges moved for aesthetic purposes. Tonally, it is a perfect match for The 1723 Monitor and 1723 Tower.

BLACK GLOSS

WHITE GLOSS

BLACK SATIN

WHITE SATIN

Design
2-way

Tweeter
28mm

Woofer
2 x 8″

Enclosure
Sealed / vented

Enclosure material
High Density Fiberboard (HDF)

Xover freq.
1500Hz

Sensitivity
89dB/2.83v/1m

Freq. response

Sealed 58-20kHz (+/-3dB)
2 vents 34-20kHz (+/-3dB)

Ports
2 x 2″

Impedance
4-ohm nominal

Included
Manual. Rubber pads. Port plugs.

Dimensions
27.5H x 63.5W x 40D cm

Weight
26.7 kg

Break-in for optimal performance
50 hours

Recommended amplifier
Up to 400W RMS @ 4ohm

FREQUENCY RESPONSE

Frequency response does not reflect maximum output but shows its true response in a anechoic chamber. Typically you will see an elevated response in the bass response below 40Hz in room due to room gain, which can add around 6dB pr. octave under 40Hz depending on the size of your room.

POLAR RESPONSE

The charts display frequency response measured at different angles, the sum of which is referred to as power response. Much scientific research has been undertaken on this subject and a linear power response has proven a substantial impact on the overall sound, because the frequency response is more even in all directions. This means an Arendal Sound speaker will be more tolerant of differences in room shape, size, construction and materials.

IMPEDANCE RESPONSE

The impedance charts are electrical measurements of the loudspeaker's resistance vs frequency.

In starting with a statement product like the The 1723 Tower and 1723 Monitor, we set ourselves a challenge in designing a matching surround speaker, that could keep up with the capabilities of our front loudspeakers. Using the same 8” mid-bass driver and waveguide tweeter on the front baffle as used throughout the 1723 Series, excellent tonal matching is assured as is pin-point imaging. To deliver an all-enveloping surround field and assist in peerless surround steering, we fitted custom built full-range dipolar drivers to the angled side baffles into our TriAxial speaker.

BLACK GLOSS

WHITE GLOSS

BLACK SATIN

WHITE SATIN

Design
TriAxial

Tweeter
28mm

Side drivers
2 x 4″

Woofer
8″

Enclosure
Sealed

Enclosure material
High Density Fiberboard (HDF)

Xover freq.
200Hz / 1400Hz

Sensitivity
87dB/2.83v/1m

Freq. response
58-20kHz (+/-3dB)

Impedance
4-ohm nominal

Included
Manual. Rubber pads. Wall mounting bracket.

Dimensions
45H x 43.2W x 21.6D cm

Weight
17.4 kg

Break-in for optimal performance
50 hours

Recommended amplifier
Up to 300W RMS @ 4ohm

FREQUENCY RESPONSE

Frequency response does not reflect maximum output but shows its true response in a anechoic chamber. Typically you will see an elevated response in the bass response below 40Hz in room due to room gain, which can add around 6dB pr. octave under 40Hz depending on the size of your room.

Note: Side drivers are disabled for the response data.

POLAR RESPONSE

The charts display frequency response measured at different angles, the sum of which is referred to as power response. Much scientific research has been undertaken on this subject and a linear power response has proven a substantial impact on the overall sound, because the frequency response is more even in all directions. This means an Arendal Sound speaker will be more tolerant of differences in room shape, size, construction and materials.

IMPEDANCE RESPONSE

The impedance charts are electrical measurements of the loudspeaker's resistance vs frequency.

Do you have an Arendal story to share?

Check out our Ambassador page

Subscribe to our newsletter!

We use cookies to extend the user friendliness according to GDPR. If you continue to use arndl.digitalbyt.com you will apply to our terms. Please read more here.