TOWER S THX

MONITOR S THX

CENTER S THX

SURROUND S THX

BOOKSHELF S THX

The 1723 Tower S is a downscaled version of the 1723 Tower. It features a completely custom built 2.5-way lineup of mid-bass drivers and a waveguide tweeter you cannot find anywhere else. The materials, quality, drivers and crossover components are just the same as you would expect from any of the 1723 speakers. The only difference is smaller enclosure with 6.5” drivers in 1723 Tower S, instead of the 8” in the 1723 Tower. The sheer performance, level of detail and dynamics delivered by Tower S is unheard of in this price category. Expect the Tower S to be compared to much higher priced speakers on the market.

BLACK GLOSS

WHITE GLOSS

BLACK SATIN

WHITE SATIN

Design
2.5-way

Tweeter
28mm

Woofer
4 x 6,5″

Enclosure
Sealed / vented

Enclosure material
High Density Fiberboard (HDF)

Xover freq.
100Hz / 1500Hz

Sensitivity
89dB/2.83v/1m

Freq. response

Sealed 49-20kHz (+/-3dB)
1 vent 39-20kHz (+/-3dB)
2 vents 35-20KHz (+/-3dB)

Ports
2 x 2.6″

Impedance
4-ohm nominal

Included
Manual. Spikes Kit. Port plugs.

Dimensions without feet
98.0H x 24.5W x 32D cm

Dimensions with rubber feet
99.2H x 24.5W x 32D cm

Dimensions with spikes kit
102.1H x 31.5W x 32D cm

Weight
31.3 kg (including spikes kit)

Break-in for optimal performance
50 hours

Recommended amplifier
Up to 400W RMS @ 4ohm

FREQUENCY RESPONSE

Frequency response does not reflect maximum output but shows its true response in a anechoic chamber. Typically you will see an elevated response in the bass response below 40Hz in room due to room gain, which can add around 6dB pr. octave under 40Hz depending on the size of your room.

POLAR RESPONSE

The charts display frequency response measured at different angles, the sum of which is referred to as power response. Much scientific research has been undertaken on this subject and a linear power response has proven a substantial impact on the overall sound, because the frequency response is more even in all directions. This means an Arendal Sound speaker will be more tolerant of differences in room shape, size, construction and materials.

IMPEDANCE RESPONSE

The impedance charts are electrical measurements of the loudspeaker's resistance vs frequency.

The 1723 Monitor S is a downscaled version of the 1723 Monitor. It features a completely custom built 2-way lineup of mid-bass drivers and a waveguide tweeter you cannot find anywhere else. The materials, quality, drivers and crossover components are just the same as you would expect from any of the 1723 speakers. The only difference is smaller enclosure with 6.5” drivers in 1723 Monitor S, instead of the 8” in the 1723 Monitor. 1723 Monitor S was developed for smaller spaces and provide the perfect sonic partner to the matching 1723 Center S. The sheer performance, level of detail and dynamics delivered by Monitor S is unheard of in this price category. Expect the Monitor S to be compared to much higher priced speakers on the market.

BLACK GLOSS

WHITE GLOSS

BLACK SATIN

WHITE SATIN

Design
2-way

Tweeter
28mm

Woofer
2 x 6.5″

Enclosure
Sealed / vented

Enclosure material
High Density Fiberboard (HDF)

Xover freq.
1500Hz

Sensitivity
88.7dB/2.83v/1m

Freq. response

Sealed 66-20kHz (+/-3dB)
1 vent 59-20kHz (+/-3dB)
2 vents 46-20kHz (+/-3dB)

Ports
2 x 1.5″

Impedance
4-ohm nominal

Included
Manual. Rubber pads. Port plugs.

Dimensions
56.9H x 24.5W x 32D cm

Weight
18.7 kg

Break-in for optimal performance
50 hours

Recommended amplifier
Up to 300W RMS @ 4ohm

FREQUENCY RESPONSE

Frequency response does not reflect maximum output but shows its true response in a anechoic chamber. Typically you will see an elevated response in the bass response below 40Hz in room due to room gain, which can add around 6dB pr. octave under 40Hz depending on the size of your room.

POLAR RESPONSE

The charts display frequency response measured at different angles, the sum of which is referred to as power response. Much scientific research has been undertaken on this subject and a linear power response has proven a substantial impact on the overall sound, because the frequency response is more even in all directions. This means an Arendal Sound speaker will be more tolerant of differences in room shape, size, construction and materials.

IMPEDANCE RESPONSE

The impedance charts are electrical measurements of the loudspeaker's resistance vs frequency.

The 1723 Center S is a downscaled version of the 1723 Center. The speaker is identical to 1723 Monitor S, but sold singly and with the grill badge moved for aesthetic purposes. This makes sure that you will have 100% timbral match when using it with any of the 1723 speakers like the Monitor S and Tower S which are sharing the exact same core MTM design. The materials, quality, drivers and crossover components are just the same as you would expect from any of the 1723 speakers. The only difference is smaller enclosure with 6.5” drivers in 1723 Center S, instead of the 8” in the 1723 Center. The sheer performance, level of detail and dynamics delivered by Center S is unheard of in this price category. Expect the Center S to be compared to much higher priced center speakers on the market.

BLACK GLOSS

WHITE GLOSS

BLACK SATIN

WHITE SATIN

Design
2-way

Tweeter
28mm

Woofer
2 x 6.5″

Enclosure
Sealed / vented

Enclosure material
High Density Fiberboard (HDF)

Xover freq.
1500Hz

Sensitivity
88.7dB/2.83v/1m

Freq. response

Sealed 66-20kHz (+/-3dB)
1 vent 59-20kHz (+/-3dB)
2 vents 46-20kHz (+/-3dB)

Ports
2 x 1.5″

Impedance
4-ohm nominal

Included
Manual. Rubber pads. Port plugs.

Dimensions
24.5H x 56.9W x 32D cm

Weight
18.7 kg

Break-in for optimal performance
50 hours

Recommended amplifier
Up to 300W RMS @ 4ohm

FREQUENCY RESPONSE

Frequency response does not reflect maximum output but shows its true response in a anechoic chamber. Typically you will see an elevated response in the bass response below 40Hz in room due to room gain, which can add around 6dB pr. octave under 40Hz depending on the size of your room.

POLAR RESPONSE

The charts display frequency response measured at different angles, the sum of which is referred to as power response. Much scientific research has been undertaken on this subject and a linear power response has proven a substantial impact on the overall sound, because the frequency response is more even in all directions. This means an Arendal Sound speaker will be more tolerant of differences in room shape, size, construction and materials.

IMPEDANCE RESPONSE

The impedance charts are electrical measurements of the loudspeaker's resistance vs frequency.

The 1723 Surround S is a downscaled version of the 1723 Surround. The materials, quality, drivers and crossover components are just the same as you would expect. The only difference is smaller enclosure with 6.5” drivers in 1723 Surround S, instead of the 8” in the 1723 Surround. Using the same 6.5” mid-bass driver and waveguide tweeter on the front baffle as used in the other 1723 S models, excellent tonal matching is assured. To deliver an all-enveloping surround field and assist in peerless surround steering, we fitted custom built 4” full-range dipolar drivers to the angled side baffles into our TriAxial speaker. The 4” surround drivers are imported straight from the original 1723 Surrounds, as this driver is optimal for the task, regardless of the main driver size. The sheer performance, level of detail and dynamics delivered by the Surround S is unheard of in this price category. Expect the Surround S to be compared to much higher priced surround speakers on the market.

BLACK GLOSS

WHITE GLOSS

BLACK SATIN

WHITE SATIN

Design
TriAxial

Tweeter
28mm

Side drivers
2 x 4″

Woofer
6,5″

Enclosure
Sealed

Enclosure material
High Density Fiberboard (HDF)

Xover freq.
200Hz / 1500Hz

Sensitivity
84dB/2.83v/1m

Freq. response
59-20kHz (+/-3dB)

Impedance
4-ohm nominal

Included
Manual. Rubber pads. Wall mounting bracket.

Dimensions
38.5H x 37.1W x 17.5D cm

Weight
13.7 kg

Break-in for optimal performance
50 hours

Recommended amplifier
Up to 250W RMS @ 4ohm

FREQUENCY RESPONSE

Frequency response does not reflect maximum output but shows its true response in a anechoic chamber. Typically you will see an elevated response in the bass response below 40Hz in room due to room gain, which can add around 6dB pr. octave under 40Hz depending on the size of your room.

POLAR RESPONSE

The charts display frequency response measured at different angles, the sum of which is referred to as power response. Much scientific research has been undertaken on this subject and a linear power response has proven a substantial impact on the overall sound, because the frequency response is more even in all directions. This means an Arendal Sound speaker will be more tolerant of differences in room shape, size, construction and materials.

IMPEDANCE RESPONSE

The impedance charts are electrical measurements of the loudspeaker's resistance vs frequency.

The Bookshelf S as the smallest and latest member of the 1723 family. Featuring a completely custom built 2-way lineup of mid-bass driver and a waveguide tweeter you cannot find anywhere else. The materials, quality, drivers and crossover components are the same premium level as you would only expect from any of the 1723 family members. Bigger is not always better.

1723 Bookshelf S was developed for even smaller spaces, or to offer great soundstage from a small speaker. Due to the exact same components and sound philosophies, the Bookshelf S can be perfectly matched to any of the 1723 speakers. Small and compact, yet incredibly powerful, dynamic and detailed with a big soundstage. Only the best experience for music and movies as you would expect from the Arendal Sound 1723 series.

Soundstage & Imaging

Huge soundstage. The 1723 Bookshelf S was designed with intent on offering a big soundstage with extremely accurate imaging. Due to its smaller size, the Bookshelf S lacks in total output compared to it’s bigger brothers, but claims back its own position with offering a wide, deep and involving soundstage. Match this speaker up with an Arendal Sound Subwoofer and you have a setup that will breathe new life to your music collection.

BLACK GLOSS

WHITE GLOSS

BLACK SATIN

WHITE SATIN

Design
2-way

Tweeter
28mm

Woofer
6,5″

Enclosure
Sealed

Enclosure material
High Density Fiberboard (HDF)

Xover freq.
1500Hz

Sensitivity
84dB/2.83v/1m

Freq. response

Sealed 65-20kHz (-6dB)

Impedance
4-ohm nominal

Included
Manual. Rubber pads.

Dimensions
38.5H x 24.5W x 32D cm

Weight
14.5 kg

Break-in for optimal performance
50 hours

Recommended amplifier
Up to 250W RMS @ 4ohm

FREQUENCY RESPONSE

Frequency response does not reflect maximum output but shows its true response in a anechoic chamber. Typically you will see an elevated response in the bass response below 40Hz in room due to room gain, which can add around 6dB pr. octave under 40Hz depending on the size of your room.

POLAR RESPONSE

The charts display frequency response measured at different angles, the sum of which is referred to as power response. Much scientific research has been undertaken on this subject and a linear power response has proven a substantial impact on the overall sound, because the frequency response is more even in all directions. This means an Arendal Sound speaker will be more tolerant of differences in room shape, size, construction and materials.

IMPEDANCE RESPONSE

The impedance charts are electrical measurements of the loudspeaker's resistance vs frequency.

Do you have an Arendal story to share?

Check out our Ambassador page

Subscribe to our newsletter!

We use cookies to extend the user friendliness according to GDPR. If you continue to use arndl.digitalbyt.com you will apply to our terms. Please read more here.